
STUDIO
N-5
DESCRIPTION
Module-based stereo class D final amplifier Powersoft D-CELL504 configured in SE and powered from the specific Powersoft D-CELL504 PSU AC / DC module. Very versatile amplifier capable of working on both channels even with asymmetrical loads. The high damping factor allows you to have great control of the bass, reproduced with power and precision. The mid-high range is instead expressed with a surprising sonic clarity. Harmonic distortion levels are almost non-existent. The aforementioned features make this amplifier ideal for any type of use. Balanced inputs.
TECHNICAL SPECIFICATIONS
Output power 4 Ω = 2 x 350W
Output power 8 Ω = 2 x 190W
Operating voltage 90V - 264V
Gain 32 dB (voltage gain x40)
Input sensitivity 0.94V / 1.70dBu
Maximum entry level 15 dBu
Frequency response 20 Hz - 20 kHz (± 0.5 dB) 1 W, 8 Ω
Signal to Noise Ratio> 100 dB (20 Hz - 20 kHz, A weighted)
Crosstalk separation> 70 dB @ 1kHz
THD + N <0.005% from 0.1W to full power
IMD SMPTE <0.005% from 0.1W to full power
IMD DIM100 <0.001% from 0.1W to full power
Input impedance 10 kΩ balanced
Slew rate30 V / µs 8 Ω, input filter bypassed
Damping factor> 1000 @ 100 Hz


UPGRADE / OPTIONAL CONFIGURATIONS
DSP. The output stage is also available with a Integrated DSP 2in / 4out, a powerful tool for shaping your audio signal and applying the dynamic processing needed to get the most out of your speakers while keeping them safe.
DUAL MONO. The frame is able to house two D-CELL504 modules that can be configured as a bridge to obtain a power of 700W per channel on loads of 8 Ω.



FRAME: black metal with 10mm silver oxidized aluminum front (Italian manufacture)
DIMENSIONS: 435x300x80mm
WEIGHT: 7,5Kg
ENTRANCES: 2 XLR model HICON HI-X3DF-G
OUTPUTS: 2 pairs of OEM BP3 terminals
FUSE: 250V / 10A (5x20mm)
ACCESSORIES INCLUDED: IEC / SHUKO terminated standard power cable